- RM5 SELF-PROG FUNCTION
- The SELF-PROG function is very useful when you need to program a currency or a coin
directly on the machines on
- which they are installed, because the first six channels of the RM5 token dispenser can
be reprogrammed without using
- external devices. Besides programming the coin/token on the specific channel you may
need to change other parameters
- of the token machine, such as the assignment of values, in this case you need to use the
Portable Calibrator or the PC kit.
Programming the token or the coin on channels from 1 to 5
- Put the 6 DIP-SWITCHES on "ON" when the machine is switched off
- Switch the machine on and introduce 1 or 2 coins
- Leave the SWITCH of the channel to program on "ON"
- Introduce coins until you hear the end-of-programming double "clack"
- Put the DIP switches on "OFF"
- Turn the token dispenser off and then back on
-
- Programming the token or the coin on channel 6
- Put the 6 DIP-SWITCHES on "ON" when the machine is switched
off.
- Switch the machine on and introduce 15 coins / tokens.
- Wait for the end-of-programming double "clack"
- Put the DIP switches on "OFF"
- Turn the token dispenser off and then back on
- NOTE: After this procedure the first two coins may be rejected.
- With this operation the new calibration (coin/token) will maintain the previously set
value. In the configuration X 21,
- the credit will be the previously set game cost.
•
Startseite
•Produkte •
Service
• Firmeninfo •
Online-Shop
•Vorteilskarte
• Post für uns?
•